Australia's leading supplier of automotive electrical solutions
From operating engine run/stop levers, throttles, chokes, valves and clutches to protecting expensive diesel engines from over-speed, low tube pressure and high temperature, you can rely on Woodward solenoids to meet the ever-changing technical demands of modern industry. The Woodward Dual Coil Solenoid: To allow a solenoid to be held energised for long periods of time without overheating, Woodward uses two separate coil windings instead of one. The first wound coil operates at a high current level to provide maximum pull or push. The second wound coil simply holds the plunger in place after it has completed its stroke and inchbottomed out. Since the current required to hold the plunger in place is low, dual coil solenoids can be energized continuosly without overheating. This unique design concept results in a highly efficient compact solenoid approximately one half the size of a comparable single coil unit.
| Specification2 | Hold Current: 0.5A |
|---|---|
| Specification3 | Hold Force: 41Lbs |
| Specification4 | Pull Current: 25A |
| Mounting Type | Flange Mount: 63.5mm Ctn to Ctn |
| Specification5 | Pull Force: 25Lbs |
| Specification1 | Coil Type: Parallel Coil Winding |
| Specification7 | Switching: External |
| Specification6 | Rated Stroke: 1 (25.4mm) |
| Type | 1700 Pull Series |
| Brand | WOODWARD |
| Voltage | 24V |
