Australia's leading supplier of automotive electrical solutions
The 8SC/SCJ series Alternators are built for the rough life, all internal connections are welded, not soldered, to prevent against the possibility of connections cracking as a result of solder becoming brittle at the elevated temperatures commonly seen inside an alternator. It also features integrated load dump protection, preventing damage to the unit that can be sustained in the event of a loss of load, as would be the case if the charging circuit was opened whilst the alternator was in use.
| Special | J180,Warning Light,12V R Terminal |
|---|---|
| Length Foot to Foot | 101mm |
| Pulley Grooves | 8V |
| Pulley Diameter | 70mm |
| Pivot Hole Diameter | 13mm |
| Pulley | 8V |
| Common Application | Bus |
| Voltage | 24V |
| Adjuster to Pivot Hole Length | 212mm |
| Brand | PRESTOLITE |
| Regulator Style | Internal 8RL3136 |
| Adjuster Hole Diameter | 1/2''UNC x 3 |
| Shaft Diameter | 22mm |
| Mounting Type | J180 |
| Amperage | 150A |
