Australia's leading supplier of automotive electrical solutions
ROS Roll Over Sensor 12/24V IP66,67,69K Rated Self Testing AS2809:2008 Compliant OE
| Specification7 | On Board LED Indicator: Yes |
|---|---|
| Specification8 | Recommended Wire: 16 - 20 AWG |
| Specification9 | Retained Test Pin: Yes |
| Specification6 | Legal Requirement: AS2809:2008 |
| Specification4 | Current draw (into VIN+): 16mA (typical) |
| Specification2 | Compatible: with most common BMIS |
| Specification3 | Connector: Yes |
| Specification10 | Reverse Polarity Protection: Yes |
| Specification5 | Fault Detection: Yes |
| Specification11 | Security Screw: Yes |
| Specification15 | Waterproof IP rating: IP66, IP67 & IP69K |
| Specification14 | Timing: >2s (3s Max) |
| Specification13 | Switching Point: 45° - 64° (55° typical) |
| Warranty | 2 Years |
| Specification12 | Self Testing: Yes |
| Brand | REDARC ELECTRONICS |
| Length | 150mm |
| Mounting Bracket | Yes |
| Height | 65mm |
| Input Voltage | 9V to 32V (12V or 24V systems) |
| Width | 122mm |
| Specification1 | Ambient Temperature: -40 to +85 Degrees C |
| Weight | 700g |
